Kyocera copier All in One Printer User Manual


 
12-8 Shortcuts
Shortcuts
AUTO Layout (p. 9-31)
1 Touch APPLI. to display the Application selection screen.
2 Touch AUTO Layout to center the original image on the copy paper.
3 Make additional copying selections, or touch OK to return to the Basic screen.
4 Select copy size and enter the print quantity amount.
5 Position original face up in the document feeder or face down on the platen glass
without skewing it. When using platen glass, DO NOT CLOSE the document cover.
6 Press [START]. When copying is completed, press [AUTO RESET] to reset the machine.
All-Image Area (p. 9-33)
1 Touch APPLI. to display the Application selection screen.
2 Touch All-image Area if you wish to copy the image completely to the edges of the
paper.
3 Make additional copying selections, or touch OK to return to the Basic screen.
4 Select copy size and enter the print quantity amount.
5 Position original(s) face up on the document feeder tray or face down on the platen
glass.
6 Press [START]. When copying is completed, press [AUTO RESET] to reset the machine.
Image Shift/ Reduce & Shift (p. 9-34)
1 First, select a copy mode (1-1, 1-2, 2-1, 2-2) and a copy size from the Basic screen.
2 Touch APPLI. to display the Application selection screen.
3 Touch Image Shift to display the Image shift selection screen.
4 Touch Image Shift (or Reduce & Shift, if image loss is likely).
5 Touch FRONT, BACK, or BOTH SIDES to indicate the side(s) on which you want the
shift to occur.
When Booklet or 2 Repeat mode of Repeat has been selected, the PAGE SPACE
setting is available.
6 Touch UP SHIFT, DOWN SHIFT, RIGHT SHIFT, or LEFT SHIFT to specify the shift
direction.
7 Use the touch screen keypad to enter the shift amount , from 0 ~ 250 mm.
8 Touch OK to return to the Application selection screen.
9 Make additional copying selections, or touch OK to return to the Basic screen.
10 Enter the print quantity amount.
11 Position original(s) face up on the document feeder tray or face down on the platen
glass.
12 Press [START]. When copying is completed, press [AUTO RESET] to reset the machine.