Filter
Top Products
Shortcuts 12-7
Shortcuts
Reverse Image (p. 9-25)
1 Touch APPLI. to display the Application selection screen.
2 Touch Reverse Image to switch from the black-on-white copying mode to white-on-
black copying.
3 Make additional copying selections.
4 Touch OK to return to the Basic screen.
5 Enter the print quantity amount.
6 Position original(s) face up on the RADF (document feeder) tray or face down on the
platen glass.
7 Press [START]. When copying is completed, press [AUTO RESET] to reset the machine.
Repeat Image (p. 9-26)
1 Touch APPLI. to display the Application selection screen.
2 Touch Repeat to display the Repeat mode selection screen.
3 Touch Vertical/Horizontal to select the mode, then specify the vertical and horizontal
widths of the scanning area using up/down arrow key, or touch ENTER REPEAT WIDTH
BY KEYPAD
to display a popup screen to enter a value from the touch screen keypad.
Touch AUTO to allow the machine to set the equal repeat area according to the size
of the original placed onto the platen glass with non-image area erase functioning.
Touch 2 Repeat, 4 Repeat, or 8 Repeat to allow the max. repeats according to the size
of the original.
4 Touch OK to return to the Application selection screen.
5 Make additional copying selections.
6 Touch OK to return to the Basic screen.
7 Enter the print quantity amount.
8 Position original(s) face down on the platen glass.
If you selected the AUTO or 2/4/8 Repeat, keep the document cover open during copying.
9 Press [START]. When copying is completed, press [AUTO RESET] to reset the machine.
Frame/Fold Erasure (p. 9-29)
1 Touch APPLI. to display the Application selection screen.
2 Touch Frame/Fold Erasure to display the Frame/Fold erasure selection screen.
3 Touch Frame Erasure (All sides) or Frame Erasure (Each side), then enter a value or
use the default setting.
4 Touch Fold Erasure, then enter a value or use the default setting.
5 Touch OK to complete the setting and return to the Application selection screen.
6 Make additional copying selections, or touch OK to return to the Basic screen.
7 Select copy size and enter the print quantity amount.
8 Position original(s) face up on the RADF (document feeder) tray or face down on the
platen glass.
9 Press [START]. When copying is completed, press [AUTO RESET] to reset the machine.