Filter
Top Products
1.5. Multi-Purpose Tray Feeding
1-17
1.5. Multi-Purpose Tray Feeding
The multi-purpose tray is incorporated in the front of the printer. It can be used in one of three
modes: the cassette mode, manual mode or first mode.
When used in the cassette mode, in combination with the main cassette, provides the printer with
the capacity to accommodate 350 sheets of paper. The manual-feed mode enables printing on
special paper, manually fed a single sheet at a time. Appendix B lists the paper types usable. See
page 1-20 for explanation on the mode.
☛ The printer assumes all paper fed from the multi-purpose tray is of A4 size (21 ×
29.7 cm) if the MP tray setting is at A4 or smaller and the multi-purpose tray mode
is Cassette. (Otherwise, the printer assumes the paper size is of legal size.) To
avoid paper jam, do not put legal size paper in the multi-purpose tray if the MP
Tray setting is at A4 or smaller and the multi-purpose tray mode is Cassette.
Selecting the Multi-Purpose Tray
1. Taking hold of the front of the printer as
shown in the figure, open the multi-purpose
tray by pulling towards you.
2. Withdraw the sub tray as shown in the dia-
gram.
3. Raise the paper protector bar until it locks in
the up position. Then adjust the paper guides
to the size of the paper being fed.
Multi-Purpose
Tray
Sub Tray
Paper Guides
Protector Bar