Filter
Top Products
4.1. Toner Kit Replacement
4-1
Chapter 4
Maintenance
This printer is designed to provide years of trouble-free service without the necessity of
printer module replacement. However, you must replace the toner container in the printer
with a replacement container from a new toner kit. Also, to ensure good print quality, vari-
ous parts inside the printer must be cleaned at regular intervals.
4.1. Toner Kit Replacement
The toner container in the printer should be replaced as soon as the message display shows
or soon after. If you continue to use the printer,
eventually the toner supply will be exhausted at which point the printer will stop printing and the
message will be shown instructing you to install a
new toner kit.
Toner kit replacement interval
The life of the toner container will vary according to the density of print in your documents. If you
print documents with an actual toner coverage of approximately 5% (with the Ecoprint mode*
turned off), the toner container will need replacing approximately once every 10,000** pages
(20,000 pages with the TK-20H).
* Turning the Ecoprint mode ON conserves toner. Refer to Chapter 2 for details.
** In the case of a new printer in which a toner kit has been installed for the first time, the number of pages that can be printed will be 6,000.
Toner Kit to be Used
The toner kit to be used with this printer is the TK-20/TK-20H. It contains the following:
❒
Toner container
❒
Waste toner bottle
❒
Wiper (lint-free) cloth
❒
Grid cleaner
❒
2 plastic bags (for disposal of the old toner container and waste toner bottle)
❒
Instructions
(The kit supplied with the printer contains only the toner container and waste toner bottle.)
☛
We strongly recommend you use only the original Kyocera toner kit. Use of origi-
nal Kyocera toner assures the intended long term reliability of the printer.