Filter
Top Products
5.4. Print Quality Problems
5-5
Faint or blurred printing
Check the control panel.
If the .&/( message is displayed and the indicator
is flashing, install a new toner kit. See Section 4.1.
Set the print density from the control panel to a higher level than the current setting. See Section
2.8.
Set the control panel setting to 12.
Check the Ecoprint setting.
See Section 2.6.
Grey background
Check the control panel.
If the .&/( message is displayed and the indicator
is flashing, install a new toner kit. See Section 4.1.
Check the print density.
Display the print density menu from the control panel and select a lighter density setting. See Sec-
tion 2.8.
Clean the main charger wire.
Open the printer's side cover. Pull the green main charger wire cleaning knob slowly in and out a
few times. See Section 4.2.