Filter
Top Products
2.1. Control Panel
2-5
Control Keys
The control panel keys are used to configure the printer.
☛ Settings made with these keys effect only the
interface currently in use.
☛ Most of the panel functions can also be controlled by PRESCRIBE IIe commands or
commands generated by application software. The printer obeys the most
recently received printer settings sent from the application software, or from the
printer driver, which take priority over control panel settings.
Key Function
ON LINE
Switches the printer on-line and off-line.
CONTINUE
1. Depending on the message being indicated, there are cases where operation
will continue after pressing the
CONTINUE
key. If such a message is displayed,
operation will be resumed after pressing this key. (See Table 5.3)
2.Used as the key in the mode selection function.
STACK
+
1. Selects whether printed pages are delivered to the face-down, face-up tray, or
optional sorter/stacker (if installed).
2. Lets you access the desired item or enter numeric values. In some of the control
procedures, the (
CONTINUE
) and (
FORM FEED
) keys are used to enter or exit
the sub items.
FORM FEED
1. Prints and feeds out one page.
2. Used as the key in the mode selection function.
CANCEL
Abandons a printing job, resets numeric values, or cancels a setting procedure.
EXIT
MODE
1. When pressed during mode selection, terminates the setting and returns to the
Ready condition.
2. Used to select the emulation, font, character code set; to read an memory card;
to select the automatic cassette mode; and others (See the last page in this man-
ual.).
–
FEED
1. Enables access to the desired item or entering of numeric values. In some of
the control procedures, the (
CONTINUE
) and (
FORM FEED
) keys are used to
enter or exit the sub items.
2. Selects the cassette feed or multi purpose tray feed.
ENTER
STATUS
1. Finalizes numeric values and other selections.
2. Prints a page of status information on all interfaces together (The printer must
be on-line.).