Filter
Top Products
LaCie 500 Series LCD Monitor Installing Your LaCie Monitor
User Manual page 10
2. Installing Your LaCie 500 Series LCD Monitor
To attach the LCD monitor to your system, follow these instruc-
tions:
1. Turn off the power to your computer.
2. For the PC or Mac® with DVI digital output: attach the DVI
signal cable to the display interface of your system (Fig. 01).
Tighten all screws.
3. For the PC with analog output: attach the 15-pin mini D-SUB
to DVI-A signal cable to the display interface of your system
(Fig. 02).
4. For the Mac with analog output: first connect the Macintosh
cable adapter (furnished separate from LaCie) to the com-
puter display interface. Second, attach the 15-pin mini D-SUB
signal cable to the Macintosh cable adapter (Fig. 03).
Fig. 01 Fig. 02
Mac Cable Adaptor
(Not included)
TECHNICAL NOTE: Some Macintosh systems do not require a
Macintosh cable adapter.
continued on next page>>
Fig. 03