Filter
Top Products
LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 33
continued on next page>>
Tag Menu title Explanation
Tag7 UNIFORMITY This function electronically compensates for the slight variations in the white UNIFORMITY
level as well as for deviations in color that may occur throughout the display area of the
screen. These variations are characteristic of LCD panel technology. This function improves
the color and evens out the luminance uniformity of the display.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the dis-
play. If greater luminance is desired over the uniform performance of the display, then
UNIFORMITY should be turned off.
UNIFORMITY LEVEL You may select the level for UNIFORMITY adjustments.
Tag8 LANGUAGE OSD Control menus are available in eight languages. Press LEFT or RIGHT to select.
OSD H.POSITION You can choose where you would like the OSD Control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD Control menu
LEFT or RIGHT.
OSD
V. POSITION
You can choose where you would like the OSD Control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD Control
menu UP or DOWN.
OSD TURN OFF The OSD Control menu will stay on as long as it is in use. Select how long the monitor waits after
the last touch of a button to shut off the OSD control menu. The preset choices are 10-120 sec-
onds by five seconds steps.
SIGNAL
INFORMATION
SIGNAL INFORMATION can be displayed in the corner of the screen. SIGNAL INFORMATION is
either ON or OFF.
RESOLUTION
NOTIFIER
The optimal resolution is 1920 x 1200. If ON is selected, a message will appear on the screen
after 30 seconds, notifying you that the resolution is not set to 1920 x 1200. Press LEFT or RIGHT
to select.
HOT KEY When this function is set to ON, you can adjust BRIGHTNESS (LEFT or RIGHT buttons) and
CONTRAST (DOWN or UP buttons) when the OSD menu is off.
FACTORY PRESET Selecting Factory Preset allows you to reset all OSD control settings back to the factory
settings. Highlighting the control to be reset and pressing the RESET button can reset
individual settings.