Filter
Top Products
LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 25
Explanation
OSD Warning menus disappear with the EXIT button.
NO SIGNAL
Provides a warning when there is no Horizontal or Vertical Sync. After the power is turned on or when there is a change of input
signal, the No Signal window will appear.
RESOLUTION NOTIFIER
This function gives a warning to use the optimal resolution. The RESOLUTION NOTIFIER window will open after power is turned
on, when there is a change of input signal, or the video signal doesn’t have proper resolution.
OUT OF RANGE
Recommends the optimal resolution and refresh rate. The OUT OF RANGE menu will open after the power is turned on, upon
receiving a change of input signal, or the video signal does not have proper timing.
PORTRAIT WARNING
When the monitor is used in the portrait position, the brightness value will be reduced to 250 cd/m
2
. If the PORTRAIT WARNING
is ON, a message will appear on the screen for ten seconds.
LUMINANCE WARNING
When the backlight cannot display the desired luminance, a message will appear on the display. To avoid this, reduce the
BRIGHTNESS level or set the AUTO LUMINANCE function to OFF (4.9. Advanced Menu Functions, TAG1).
4.8. OSD Warnings
4.9. Advanced Menu Functions
To access the advanced menu:
1. Make certain your monitor is off.
2. Turn on your monitor by pushing the POWER and INPUT/SELECT
buttons simultaneously for at least one second. The advanced
menu will only appear once you press any of the control buttons
(EXIT, LEFT, RIGHT, UP, DOWN) when the screen is active.
3. You will see the Advanced menu. This menu is larger than the
normal OSD.
4. To make an adjustment, ensure that the Tag is highlighted,
then press SELECT. To move to another Tag, press EXIT, then
LEFT or RIGHT to highlight the next Tag.
To exit the advanced menu, turn off and restart your monitor by
using the POWER button alone.
TECHNICAL NOTE: It is possible to change the DVI SELEC-
TION, the POWER MANAGER, or the EDID EXTENSION settings
while the NO SIGNAL or OUT OF RANGE messages are dis-
played.
continued on the next page>>