Filter
Top Products
LaCie 500 Series LCD Monitor Installing Your LaCie Monitor
User Manual page 12
7. Hold all cables firmly and place the cable cover onto the stand.
To remove the cable cover, lift the cover off as shown in Fig.
08.
8. Connect one end of the power cord to the AC inlet on the back
of the monitor and the other end to the power outlet.
9. The Vacation Switch on the left side of the monitor must be
turned on in order to use the front power button. It is best
to leave the Vacation Switch on all the time save for lengthy
periods of inactivity. Use the front power button to turn on the
monitor (Fig. 10) before starting the computer.
TECHNICAL NOTE: The Vacation Switch is a true ON/OFF
switch. If this switch is in the OFF position, the monitor cannot be
turned on using the front button. DO NOT adjust the Vacation
Switch repeatedly.
10. No-touch auto adjust automatically tunes the monitor to opti-
mal settings upon initial setup for most timings. For further ad-
justments, use the following OSD (on-screen display) controls:
❖ Auto Contrast (Analog input only)
❖ Auto Adjust (Analog input only)
Refer to 4. OSD (On-Screen Display) Control Menu Functions for
a full description of the OSD controls.
Fig. 08 Fig. 09
Fig. 10
Vacation
Switch
Power
Button
TECHNICAL NOTE: Please refer to Safety Precautions and
Maintenance for proper selection of an AC power cord.