LaCie 500 Series LCD Monitor Installing Your LaCie Monitor
User Manual page 11
5. Place hands on each side of the monitor to tilt the LCD panel
to a 30-degree angle and gently tilt in an upward direction to
the highest position (Fig. 04).
6. Attach all cables to their appropriate interfaces (Fig. 04).
7. To keep the cables neatly organized, place them into the
cable management system that is built into the stand.
❖ Place the D-SUB cable (not included) and the power cable
into the specific hooks as indicated (Fig. 05).
❖ Place the DVI cable and the 15-pin mini D-SUB to DVI-A
cable into the hooks as indicated (Fig. 06).
❖ When using the monitor in Portrait mode, place the DVI
cable and the 15-pin mini D-SUB to DVI-A cable into the
hooks as indicated (Fig. 07).
8. Make sure all cables are resting flat against the stand (Fig.
06). Please provide room for Tilting, Rising, and Lowering the
monitor screen as well as screen rotation when you manage
cables.
Fig. 04 Fig. 05 Fig. 06
Highest
Stand
Position
30°
Tilt
DVI-I
DVI-D
D-SUB
Fig. 07
continued on next page>>
CAUTION: Incorrect cable connections may: result in irregular
operation, damage display quality/components of LCD module,
and/or shorten the module’s life.
DC-Out