Filter
Top Products
LaCie 500 Series LCD Monitor Using Your LaCie Monitor
User Manual page 15
3.1.5. Remove the Monitor Stand for
Mounting
To prepare the monitor for mounting:
1. Disconnect all cables.
2. Place hands on each side of the monitor and lift it to the high-
est position (Fig. 12).
3. Place monitor face down on a non-abrasive surface (Fig. 17).
Fig. 17
Fig. 18 Fig. 19
4. Place one hand around the base and one hand on the Quick
Release Lever. Move the Quick Release Lever to the right, as
indicated by the arrows (Fig. 18).
5. Lift the bottom of the stand to unhook it from the monitor (Fig.
19). The monitor is now ready for mounting.
TECHNICAL NOTE: Use only VESA-compatible alternate
mounting methods (100 mm pitch).
IMPORTANT INFO: Please handle with care when removing
the monitor stand.
Quick
Release
Lever