Filter
Top Products
LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 19
Symbol Menu title Explanation
LEFT/RIGHT Controls Horizontal Image Position within the display area of the LCD.
DOWN/UP Controls Vertical Image Position within the display area of the LCD.
H.SIZE (V.SIZE)
(Analog Input Only)
Adjusts the horizontal size. If the AUTO ADJUST function does not provide a satisfactory
picture setting, further tuning can be performed using the H.SIZE (OR V.SIZE) function
(dot clock). A Moiré test pattern may prove helpful in finding your ideal setting. Please be
advised that this setting may alter the width of the picture. Use the LEFT/RIGHT Menu to
center the image on the screen and note that the image should be homogeneous.
FINE
(Analog Input Only)
Improves focus, clarity, and image stability. Use the FINE function to complement or en-
hance any adjustments the have been made with AUTO ADJUST and H.SIZE (OR V.SIZE).
A Moiré test pattern may prove helpful in finding your ideal setting. The image should be
homogeneous.
AUTO FINE
(Analog Input Only)
Automatically adjusts the FINE setting to compensate for changes in the signal condition.
This function makes adjustments periodically, approximately every 33 minutes, or when a
change in signal timing is detected.
EXPANSION Sets the zoom.
FULL: The image is expanded to 1920 x 1200 regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM: Refer to 4.9. Advanced Menu Functions for detailed instructions.
FINE
value is incorrect
FINE
value is correct
H.SIZE
value is incorrect
H.SIZE
value is improved
H.SIZE
value is correct
4.3. Image Controls