LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 35
Tag Menu title Explanation
Tag9 PORTRAIT WARNING When the monitor is used in the Portrait position, the brightness value will be reduced to 250
cd/m
2
maximum. If the Portrait Warning is ON, a message will appear on the screen for ten
seconds.
DDC/CI DDC/CI ENABLE/DISABLE: Turns on or off the two way communication and control of the
monitor.
INPUT SETTING Video Band Width (Analog Input Only): Used when there is too much noise on the screen.
Press LEFT or RIGHT to select. The higher the number, the greater the correction.
Sync Threshold (Analog input only): Adjusts the slice level of a synchronization signal. Press
SELECT to move the adjustment menu. Adjusts the sensitivity of the separate or composite
input signals. Try this option if the FINE adjustment does not successfully eliminate the noise.
SOG Threshold (Analog input only): Adjusts the sensitivity of the Sync On Green input sig-
nals. Adjusts the slice level when separating synchronization from the Sync On Green signal
input. Press LEFT or RIGHT to select.
CLAMP POSITION: Operating your monitor at a non-standard timing may cause images
to appear darker than normal or have color distortion. The CLAMP POSITION control will
adjust images to their normal state.
TagA TILING A single screen displaying up to 25 monitors, TILING allows for viewing multiple signals. It
will be able to divide up to five each on the Horizontal and the Vertical.
The PC’s output signal must be sent to a distribution amplifier to each monitor.
H MONITORS: Select the number of horizontal displays.
V MONITORS: Select the number of vertical displays.
MONITOR NO.: Select a position to expand the screen.
FRAME CUT: Works in tandem with TILING to compensate for the width of the tile bezels in
order to accurately display the image.
FRAME CUT with four monitors (black area shows monitor frames):
Monitor 1
Monitor 2
Monitor 3
Monitor 4
Monitor 1
Monitor 2
Monitor 3
Monitor 4
FRAME CUT OFF FRAME CUT ON
TagB INFORMATION INFORMATION listed includes the current display resolution technical data, the horizontal
and vertical frequencies, and the model and serial numbers.