Filter
Top Products
LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 22
Symbol Menu title Explanation
VIDEO DETECT Selects the method of video detection when more than one computer is connected.
FIRST
The video input must be switched to FIRST mode. When the primary video input signal is
lost, the monitor searches for a secondary signal from the alternate video input port. If
a video signal is present, the monitor will automatically switch to the active source. The
monitor will not look for other video signals while the primary video source is present.
LAST
The video input must be switched to LAST mode. No matter if a video source is playing in
the primary video port, the monitor will switch signals if video is present in the alternate, or
secondary port.
NONE
The monitor will not search the alternate video input port unless the port has been turned
on.
OFF TIMER The monitor will automatically power down after a preset period of use. Before powering
off, a message will appear on the screen asking if the user wants to delay the shut off time
by 60 minutes. Press any OSD button to accept the delay. To adjust the preset period of
time, select ON, then press SELECT and LEFT or RIGHT.
UNIFORMITY Electronically compensates for the slight variations in the white uniformity level, as well as
for deviations in color that may occur throughout the display area of the screen. These
variations are characteristic of LCD panel technology. This function improves the color and
evens out the luminance uniformity of the display. Using the UNIFORMITY feature reduces
the overall peak luminance of the display. If greater luminance is desired over the uniform
performance of the display, then UNIFORMITY should be turned off.
POWER MANAGER The Power Manager has three settings:
OFF
Monitor does not go into power save mode when the input signal is lost.
STANDARD
Monitor enters power save mode automatically when the input signal is lost.
OPTION
Monitor enters power save mode automatically when the amount of surrounding light goes
below the level that is determined by the user. The level can be adjusted in Tag7 of the
4.9. Advanced Menu Functions. When in POWER MANAGER, the LED on the front of the
monitor blinks amber. While in POWER MANAGER, push any of the front buttons, except
for POWER and SELECT, to return to normal. When the amount of surrounding light
returns to standard levels, the monitor will automatically return to normal mode.