Filter
Top Products
10. Install the two screws to secure the mSATA solid-state drive to the storage converter.
Figure52. Installing the screws that secure the mSATA solid-state drive
11. Slide the mSATA solid-state drive storage converter into the card reader drive bay until it snaps into
position.
Figure53. Installing the mSATA solid-state drive
12. Connect the signal cable and the power cable to the mSATA solid-state drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 99.
Chapter 5. Installing or replacing hardware 69