Lenovo 232036U Computer Monitor User Manual


 
Left click: To mimic a single left click on a mouse, tap anywhere on the touch pad once or press the
left click zone 3 once. To mimic a double click on a mouse, tap anywhere on the touch pad twice
or press the left click zone 3 twice.
Right click: To mimic a right click on a mouse, press the right click zone 2 once.
Left click and drag: To mimic a left click and drag on a mouse, do either of the following:
Tap anywhere on the touch pad twice and hold the nger on the touch pad, slide the same nger or
another nger on the touch pad, whichever is more convenient and then release the nger(s).
Press the left click zone
3 and hold the nger on the touch pad, slide another nger on the touch
pad, and then release both ngers.
Right click and drag: To mimic a right click and drag on a mouse, press the right click zone 2 and hold
the nger on the touch pad, slide another nger on the touch pad, and release both ngers.
Using the multi-touch touch pad
The touch pad of your computer supports multi-touch with which you can zoom in, zoom out, scroll or rotate
on the screen while browsing the Internet or reading or editing a document.
For details, refer to the Help in UltraNav.
Customizing the touch pad
To customize the touch pad, do as follows:
1. Click Start Control Panel Hardware and Sound Mouse UltraNav. A panel for UltraNav
Device Settings pops up.
2. Click Manage Settings to open the Mouse properties window.
3. Click the UltraNav tab and proceed to customizing the touch pad.
For details, refer to the Help in the Utility.
Disabling the UltraNav pointing device and using an external mouse
If you attach an external mouse to a USB connector, you can use the external mouse simultaneously with
the TrackPoint pointing device and the touch pad.
Disabling the TrackPoint or the touch pad
To disable the TrackPoint or the touch pad, do either of the following:
1. Click Start Control Panel Hardware and Sound Mouse UltraNav.
2. To disable the TrackPoint pointing device, clear the check box for Enable TrackPoint.
To disable the touch pad, clear the check box for Enable touch pad.
3. Click OK.
Note: You also can open the UltraNav properties window by clicking the UltraNav icon in the Windows
notication area. For details, refer to the instructions in “Adding the UltraNav icon to the Windows notication
area” on page 25.
Adding the UltraNav icon to the Windows notication area
For easy access to the UltraNav properties, you can enable the display of the UltraNav icon in the Windows
notication area.
To enable the display of the UltraNav icon in the Windows notication area, do the following:
1. Click Start Control Panel Hardware and Sound Mouse UltraNav
Chapter 2. Using your computer 25