Filter
Top Products
Read this rst before replacing the LCD panel
For ThinkPad W530 models with a color sensor:
Important:
If your LCD panel needs a replacement, order a special LCD panel FRU kit for color sensor model from Lenovo.
The FRU kit contains a LCD panel, a CD and an instruction yer. For the correct FRU kit part number, check on
the Web site at http://www.lenovo.com/serviceparts-lookup.
To replace the LCD panel, be sure to follow these steps:
1. Before you replace the LCD panel, locate the label on the plastic jacket of the new LCD panel. Locate
the numeric key number on the label and record it.
2. Replace the failing LCD panel with the new one that was shipped to you. For the detailed replacement
procedure, see “Removal steps of LCD cable, camera cable, LCD panel, and hinges” on page 109
.
3. Start the computer and enter the Windows operating environment.
4. Insert the CD that came with the new LCD panel. If the autorun function is enabled, the
Panel Replacement Utility program starts automatically. If the program does not start automatically, run
the program manually by exploring the CD and double-clicking PanelReplacementUtility.exe.
5. Follow the instructions on the screen to perform the initial color calibration. When the key number is
required, type the number that you recorded in step 1. Then the Panel Replacement Utility program
starts to measure the new LCD panel and perform the initial color calibration.
6. When the initial calibration is nished, a dialog box is displayed. Click OK to exit the
Panel Replacement Utility program.
Important: If the computer is protected by a hard disk drive password or a Windows password, do one
of the following:
• Ask the customer for the password to run the Panel Replacement Utility program.
• Provide the CD and the numeric key number to the customer and guide the customer to run the Panel
Replacement Utility program.
Failing to run the Panel Replacement Utility program will require another LCD panel replacement.
Removal steps of LCD cable, camera cable, LCD panel, and hinges
In step 1 , release the antenna cables from the left and right hinges.
Chapter 10. Removing or replacing a FRU 109