Filter
Top Products
1
1
2
When installing: Insert the notched end of the memory module into the slot. Press the memory module
rmly, and pivot it until it snaps into place. Make sure that it is rmly installed in the slot and does not
move easily.
1050 Hard disk drive or solid state drive
For access, remove this FRU:
• “1010 Battery pack” on page 68
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Removal steps of hard disk drive or solid state drive
Note: Loosen the screw 1 , but do not remove it.
72 Hardware Maintenance Manual