Filter
Top Products
10. Remove any of the following components that are installed on the system
board and put them in a safe, static-protective place:
v Adapters (see “Removing an adapter” on page 184).
v Extender card (see “Removing an extender card” on page 207).
v DIMMs (see “Removing a memory module” on page 210).
v Microprocessors and heat sinks (see “Removing a microprocessor and heat
sink” on page 218).
v Battery (see “Removing the battery” on page 172).
11. Rotate the release lever toward the front of the chassis.
12. Slide the system board toward the front of the server to disengage the tabs
from the chassis; then, grasp the handles and carefully lift the system board
out of the server.
13. If you are instructed to return the system board, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing the system board
1 Handle
2 Release lever
To install the system board, complete the following steps:
232 ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual