Filter
Top Products
Cong menu items
Table 6. Cong menu items
Menu item
Submenu item Selection Comments
Wake On LAN
• Disabled
• AC only
• AC and Battery
Enable the system to Power
on when the Ethernet
controller receives a magic
packet.
If you select “AC Only”,
Wake On LAN is enabled
only when acpower adapter
is attached.
If you select “AC and
Battery”, Wake On LAN is
enabled with any power
sources.
Note: AC is required with
magic packet type Wake
On LAN.
Note: Wake On LAN
function does not work
when a hard disk password
is set.
Network
Ethernet LAN Option ROM
• Disabled
• Enabled
Load the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
USB UEFI BIOS Support
• Disabled
• Enabled
Enable or disable boot
support for USB diskette,
USB memory key, and USB
optical drive.
Always On USB
• Disabled
• Enabled
If you select “Enabled”, the
external USB devices can
be charged via USB ports
even when the system is in
low power mode (standby,
hibernate, or power-off).
USB
Always On USB Charge in
off mode
• Disabled
• Enabled
If you select “Enabled”, the
Always On USB connector
enables you to charge
some devices, such as iPod
and iPhone and BlackBerry
smartphones.
Note: If you want to charge
these devices when your
computer is in hibernation
mode or powered off, you
will need to open the Power
Manager program and
congure corresponding
settings to enable the
Always On USB connector
function. For details
about how to enable the
186 User Guide