Lenovo 429040 Laptop User Manual


 
4 Combo audio jack
To listen to the sound from your computer, connect a headphone or a headset, that has a 3.5mm 4-pole
plug, to the combo audio jack.
Notes:
If you are using a headset with a function switch, for example, a headset for an iPhone mobile digital
device, do not press this switch while using the headset. If you press it, the headset microphone will
be disabled, and the internal microphone will be enabled instead.
The combo audio jack does not support a conventional microphone. For more information about the audio
devices supported by the combo audio jack of your computer, see “Using audio features” on page 77
.
5 Ethernet connector
Connect your computer to a LAN with the Ethernet connector.
DANGER
To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector.
You can only connect an Ethernet cable to this connector.
Two indicators, to the upper right and left of the connector, show the status of the network connection.
When your computer connects to a LAN and a session with the network is available, the upper right indicator
is solid green. While data is being transmitted, the upper left indicator blinks yellow.
For details, refer to the instructions in “Access Connections” on page 34
.
Note: If you attach your computer to the ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3,
or ThinkPad Mini Dock Plus Series 3 and use an Ethernet connector, use the Ethernet connector on the
ThinkPad Port Replicator Series 3, ThinkPad Mini Dock Series 3, or ThinkPad Mini Dock Plus Series 3,
not the one on the computer.
6 Always On USB connector
The Universal Serial Bus connectors are used for connecting devices compatible with a USB interface,
such as a printer or a digital camera.
By default, even if your computer is in sleep (standby) mode, the Always On USB connector still enables
you to charge some devices, such as iPod, iPhone, and BlackBerry smartphones, by attaching the devices
to the connector.
However, with the ac power adapter attached, if you want to charge these devices when your computer
is in hibernation mode or powered off, you will need to open the Power Manager program and congure
corresponding settings to enable the Always On USB connector function. For details about how to enable
the Always On USB connector function, refer to the on-line help of the Power Manager program.
Note: Your computer is compatible with USB 1.1 and 2.0.
7 Media card reader slot
Depending on the model, your computer may have a media card reader slot. The media card reader
supports the following cards:
SD card
SDHC card
SDXC card
Chapter 1. Product Overview 11