Filter
Top Products
2. Press the release button 1 to open the handle of the dummy hard-disk-drive tray.
Figure84. Opening the handle of the dummy hard-disk-drive tray
3. Pull the handle and carefully slide the dummy hard-disk-drive tray out of the front of the chassis.
Figure85. Removing the dummy hard-disk-drive tray
4. Touch the static-protective package that contains the 2.5-inch solid-state drive to any unpainted surface
on the outside of the server. Then, take the solid-state drive out of the package.
Note: Do not touch the circuit board on the solid-state drive.
Chapter 6. Installing, removing, or replacing hardware 121