Filter
Top Products
The following illustration shows the location of the hot-swap hard-disk-drive backplane. You need to remove
the server cover to access the backplane. See “Removing the server cover” on page 69.
Notes:
• Depending on the model, your server might look slightly different from the illustrations in this topic.
• The following illustration is based on 3.5-inch hot-swap hard disk drives with one backplane 1 .
Figure21. Hot-swap hard-disk-drive backplane location
Backplane for 3.5-inch hard disk drives
This topic provides information to help you locate the connectors on the backplane for 3.5-inch hard disk
drives.
The following illustrations show the connectors on the backplane for 3.5-inch hard disk drives.
Figure22. Front view of the backplane for 3.5-inch hard disk drives
1 Slot 0 for a 3.5-inch hard disk drive 3 Slot 2 for a 3.5-inch hard disk drive
2 Slot 1 for a 3.5-inch hard disk drive 4 Slot 3 for a 3.5-inch hard disk drive
34 ThinkServer RD540 User Guide and Hardware Maintenance Manual