Filter
Top Products
8. Position the new ThinkServer RAID Super Capacitor Module with the bracket on the chassis so that the
mounting studs 1 on the chassis pass through the corresponding holes in the bracket. Then, install the
two screws to secure the ThinkServer RAID Super Capacitor Module bracket.
ID
Mem
CPU
PSU
Figure102. Installing the ThinkServer RAID Super Capacitor Module with the bracket on the chassis
9. Connect the cable to the new ThinkServer RAID Super Capacitor Module.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement procedure, go to “Completing the parts replacement” on page 154.
Replacing the hot-swap hard-disk-drive backplane
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
This topic provides instructions on how to replace the hot-swap hard-disk-drive backplane.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
132 ThinkServer RD540 User Guide and Hardware Maintenance Manual