Lenovo RD540 Computer Hardware User Manual


 
Notes:
Enabled means that the function is congured.
Disabled means that the function is not congured.
The Advanced menu contains the following submenus. For more information, enter the corresponding
submenu and refer to the instructions on the screen.
PCI/PCIE Conguration: View and set PCI conguration parameters.
ACPI Conguration: View and set ACPI conguration parameters.
Processor Conguration: View information about the installed microprocessors and set microprocessor
conguration parameters.
Memory Conguration: View information about the installed memory modules and set memory
conguration parameters.
Chipset Conguration: View and set chipset conguration parameters.
SATA/SAS Conguration: View information about the installed SATA or SAS devices and set SATA or
SAS conguration parameters.
USB Conguration: View and set USB conguration parameters, such as enabling or disabling USB
devices.
Serial Conguration: View and set serial connector conguration parameters.
UEFI Network Setup: View and set UEFI Ipv4 PXE and UEFI Ipv6 PXE conguration parameters.
iSCSI Conguration: View and congure the iSCSI parameter.
Security menu
You can set passwords and congure the TPM function on the Security menu in the Setup Utility program.
For each menu item, press Enter to show selectable options and select a desired option by using the up and
down arrow keys or type desired values from the keyboard. Some items are displayed on the menu only if
the server supports the corresponding features.
Notes:
Enabled means that the function is congured.
Disabled means that the function is not congured.
The Security menu contains the following items:
Administrator Password: Set an administrator password to protect against unauthorized access to
your server. See “Using passwords” on page 55
.
User Password: Set a user password to protect against unauthorized access to your server. See “Using
passwords” on page 55.
TPM/TCM: Congure the TPM function if your server has a TPM installed in the TPM connector on the
system board. See “Conguring the TPM function” on page 56.
Server Management menu
You can view system information and view or change event log and BMC settings on the Server
Management menu in the Setup Utility program. On each submenu, press Enter to view the information or
show selectable options and select a desired option by using the up and down arrow keys. Some items are
displayed on the menu only if the server supports the corresponding features.
The Server Management menu contains the following submenus. For more information, enter the
corresponding submenu and refer to the instructions on the screen.
Chapter 5. Conguring the server 53