Filter
Top Products
Diagnostic Information 2-7
4069-XXX
975 - 979
Network Card X
The following errors indicate a failure with the network
card in the specified slot. X=any card installed in slots
1,2 or 3. 975 - Unrecognizable Network Card x. Replace
Network Card x.
976 - Unrecoverable software error in Network Card x.
977 - Controller software detects that a Network Card is
installed in slot x but cannot establish communications
with it.
978 - Bad checksum while programming Network Card
x. Replace Network Card x.
979 - Flash parts failed while programming Network
Card x.
If the printer is a network model, replace the controller
board.
980 <device>
Comm
The engine is experiencing unreliable communications
to the specified device.
981 <device> The engine protocol violation detected by the specified
device.
982 <device>
Comm
Communications error detected by the specified device.
983 <device> Invalid command received by the specified device.
984 <device> Invalid command parameter received by the specified
device.
Note: Service Errors 980 thru 984 <device> can be one
of the following: engine board, duplex, tray x (1,2,3,4 or
5), envelope feeder or output bin x (1,2 or 3).
990 <device> Indicates an equipment check condition has occurred in
the specified device, but the device is unable to identify
the exact component failure.
Note: <device> can be one of the following: duplex, tray
x (1,2,3,4 or 5), envelope feeder or output bin x(1,2 or 3).
991 <device>
Card
The specified device has detected an equipment check
in its system card.
Note: <device> can be one of the following: duplex, tray
x(1,2,3,4 or 5), envelope feeder or output bin x (1,2 or 3).
Error Code Action