Filter
Top Products
2-20 Service Manual
4069-XXX
User Line 2 Messages
If none of the conditions exist that are listed in the following table,
line 2 is blank. If any of the messages in the table are displayed the
following actions can be taken:
Press Menu> or <Menu to take the printer offline and access the
Ready Menu group.
Note: The Menu buttons are not active if Menu Lockout is turned
on.
Press Stop to take the printer offline. The Not Ready message is
displayed. No more data is processed from the host computer. Press
the Go button to return the printer to the Ready state.
81 Engine Code CRC
Failure
This error displays when the microcode to be
programmed in the engine flash code module has
failed a CRC check. Press Go to clear the
message. The microcode data is discarded and
must be re-transmitted from the host computer.
88 Toner Low This message displays when toner low occurs
and the toner low alarm is activated. Press Go to
clear this message.
User Message Explanation
Toner Low If the toner cartridge is low, then “Toner Low”
displays. The Toner Low condition clears
whenever the upper front door is opened, and
Toner Low displays again if the condition exists
after the upper front door is closed.
Tray X Missing If any of the input trays are missing, then “Tray X
Missing” displays (where X designates which Tray
(1 through 5) is missing. If multiple trays are
missing, they are prioritized in this order: Tray 1,
2..., then tray 5. Tray X Missing status clears
whenever Tray X is reinserted.
User Error Message Explanation