Filter
Top Products
2-10 Service Manual
4069-XXX
Envelope Feeder Sub Error Codes
Status byte 1 contains the most valuable information to help isolate a
feed problem with the envelope feeder and is the only byte contained
in the following table.
84 xx 1F The paper fed too early from Tray 1.
84 xx 21 The smart option did not pick the paper.
84 xx 22 The smart option did not pick the paper.
8E xx 02 The input sensor is not activated even though the paper is
picked from the source.
8E xx 0B The autocompensator DC motor stalls when attempting to
pick a sheet of paper.
8E xx 11 The autocompensator DC motor takes too long to ramp up.
Status
Byte 1
Explanation
00 There was no envelope feeder error reported.
10 Printer failed POST - Homing of Envelope feeder
11 Printer failed POST - Halted Envelope Feeder
21 The envelope feeder failed to feed, envelope jam.
30 The D.C. motor failed to reach operating speed.
32 The motor stalled.
36 The motor failed to stop.
Status
Bytes 1, 2,3
Explanation