Lexmark CS410 Printer User Manual


 
Use To
Portrait Width
3–8.5 inches
76–216 mm
Set the width for portrait orientation.
Notes:
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
8.5 inches is the US factory default setting. You can increase the
width in 0.01inch increments.
216 mm is the international factory default setting. You can increase
the width in 1mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the width for portrait orientation.
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. You can increase the
height in 0.01inch increments.
356 mm is the international factory default setting. You can increase
the height in 1mm increments.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about paper loaded in trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information.
Device Statistics Print a report containing printer statistics such as supply information and details
about printed pages.
Network Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu appears only in network printers or printers connected to
print servers.
Network [x] Setup Page Print a report containing information on network printer settings, such as the
TCP/IP address information.
Notes:
This menu item is available only when more than one network option is
installed.
This menu item appears only in network printers or in printers connected
to print servers.
Profiles List Print a list of profiles stored in the printer.
Understanding the printer menus 73