Lexmark CS410 Printer User Manual


 
Setup menu
Use To
Printer Language
PCL Emulation
PS Emulation
Set the default printer language.
Notes:
PS Emulation is the factory default setting. PS Emulation uses
a PS interpreter for processing print jobs.
PCL Emulation uses a PCL interpreter for processing print
jobs.
Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Print Area
Normal
Fit To Page
Whole Page
Set the logical and physical printable area.
Notes:
Normal is the factory default setting. When attempting to
print data in the nonprintable area defined by the Normal
setting, the printer clips the image.
Fit to Page fits the page content into the selected paper size.
Whole Page allows the image to be moved into the
nonprintable area defined by the Normal setting, but the
printer clips the image at the Normal setting boundary. This
setting affects only pages printed using a PCL 5e interpreter
and has no effect on pages printed using the PCL XL or
PostScript interpreter.
Printer Usage
Max Yield
Max Speed
Set color toner use in printing.
Note: Max Yield is the factory default setting.
Black Only Mode
On
Off
Set the printer to print text and graphics using only the black toner
cartridge.
Notes:
Off is the factory default setting.
The setting value does not affect the ability of the printer to
generate color output from flash drive print jobs.
Resource Save
On
Off
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
job that requires more than the available memory.
Notes:
Off is the factory default setting. Off sets the printer to retain
the downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory full [38] appears, but
downloads are not deleted.
Understanding the printer menus 89