Filter
Top Products
Use To
Timeouts
Print Timeout
Disabled
1–255
Set the amount of time (in seconds) the printer waits to receive an
end‑of‑job message before canceling the remainder of the print job.
Notes:
• 90 is the factory default setting.
• When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
• Print Timeout is available only when using PCL. This setting
has no effect on PostScript emulation print jobs.
Timeouts
Wait Timeout
Disabled
15–65535
Set the amount of time (in seconds) the printer waits for additional
data before canceling a print job.
Notes:
• 40 is the factory default setting.
• Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Timeouts
Job Hold Timeout
5‑255
Set the amount of time (in seconds) the printer waits for user
intervention before it holds jobs that require unavailable resources
and continues to process print jobs in the print queue.
Notes:
• 30 is the factory default setting.
• This menu appears only when a printer hard disk is installed.
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Set the printer to restart when an error is encountered.
Note: “Reboot always” is the factory default setting.
Error Recovery
Max Auto Reboots
1–20
Set the number of automatic restarts the printer can perform.
Notes:
• 5 is the factory default setting.
• When the number of automatic restarts equivalent to the
values of this setting has been reached, the printer displays
the applicable error instead of restarting.
Print Recovery
Auto Continue
Disabled
5–255 sec
Let the printer automatically continue printing from certain offline
situations when not resolved within the specified period.
Note: Disabled is the factory default setting.
Understanding the printer menus 87