Filter
Top Products
Loading the envelope feeder
55
Printing
Loading the envelope feeder
The optional envelope feeder can accept a variety of envelope sizes. However, the envelope feeder must be adjusted
correctly to ensure trouble-free printing. To load the envelope feeder:
1 Adjust the envelope support for the length of envelope you are loading.
• Fully closed (pushed in toward the printer) for short envelopes
• Extended to the middle position for medium-length envelopes
• Fully open (extended to its full length) for long envelopes
Warning: Do not place objects on the envelope feeder. Avoid pressing down on it or applying excessive force.
2 Lift the envelope weight back toward the printer. It stays in place.
3 Slide the width guide to the far right.
4 Flex a stack of envelopes back and forth, and then straighten the edges on a level surface. Press down the
corners to flatten them.
Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly.