Filter
Top Products
Identifying and linking output bins
59
Printing
Linking output bins
Linking output bins lets you create a single output source so the printer can automatically switch output to the next available
bin. You can also set the output type for media such as card stock or envelope sizes that cannot be sent to an optional
output bin. For more information on the values available to configure your output bins, see the Menus and Messages Guide.
Note: The bin sequence for linking always starts with the Standard Bin and proceeds from the bin nearest
to the floor to the bin farthest from the floor.
To link output bins:
1 Press on the operator panel.
2 Press until the appears next to Paper Menu, and then press
3 Press until the appears next to Bin Setup, and then press .
4 Press until the appears next to Configure Bins, and then press .
5 Press until the appears next to Link, and then press .
The printer returns to Ready.
Output
expander
• 650 sheets
(75 g/m
2
) of plain
paper
• 50 envelopes
(75 g/m
2
)
T640
T642
T644
3 1 5-bin
mailbox, 1
high-capacity
output stacker,
or 1 finisher*
5-bin
mailbox
120 sheets
(75 g/m
2
) of plain paper
for each of the five bins
for a total of 600 for all
bins
T642
T644
2 1 output
expander or 1
finisher*
Output
bin name
Each bin accommodates How many
can be
installed on
the printer
Bin is
allowed to
connect with
Illustration of output binPrint media Printer Models
* See the instructions that came with the option for information on how to install options in relation to each other.