Filter
Top Products
30
9.2.17. Removing the WWAN Antenna
Board (MAIN), (SUB)
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. to 9.2.15. first.
1. Open the SIMM cover and then remove the 2
screws (U).
Screw (U) : DXHM0057ZA (N7)
2. Remove the antenna cover.
3. Peel off the LCD hold sheet.
LCD Hold Sheet : DFHR3E92ZA (K1028)
4. Peel off the 2 cable fixed sheets and cable blind
sheet.
Cable Fixed Sheet : DFHR8526ZA (K1030)
Cable Blind Sheet : DFGX0475ZA (K1003)
5. Remove the each 2 screws (V) and then remove
the antenna board (MAIN), (SUB).
Screw (V) : DFHE5025XA (N1)
9.2.18. Removing the WWAN Board / LCD
Hook WAN
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. to 9.2.15., 9.2.17. first.
1. Disconnect the WM cable from the connector
(CN1501).
2. Remove the 6 screws (W) and then remove the
WWAN board.
Screw (W) : DFHE5025XA (N1)
LCD Rear
SIMM Cover
Screw (U)
Antenna Cover
Cable Fixed Sheet
Cable Blind Sheet
LCD Rear
LCD Hold Sheet
WWAN Antenna
Board (MAIN)
WWAN Antenna
Board (SUB)
Antenna
Cable
Antenna
Cable
Screw (V)
LCD Rear
CN1501
WM Cable
WWAN Board
LCD Rear
Screw (W)
Screw (W)
WWAN Board