Filter
Top Products
66
Side Cover R
MCH Rubber
(Note)
Safety work
Installs in the dent part of a top case
Thing on keyboard installation side without running aground
Connection
Inserts from side
and raises on
Heat Spreader(Top Case Side)
Heat Spreader(Top Case Side)
PET Tape
Grease (G-751) is spread
A remaining tape is affixed on an opposite side
When the part of aluminum with a thin all
surroundings bends, Sheet and the cable might
be damaged.Therefore, correct when bending.
However, correct without correcting by bare-
handed with a tool such as pliers.
Inserts in the corner hole part of a Top Case
Inserts under the Top Case
The hook is Hooked
The hook is Hooked
DIMM Cover Sheet
DIMM Cover
DIMM Cover is arranged
making not run aground
in screw tightening respect.
Rib application
DIMM Heat Sheet
For the cutting lack part to get
on the boss and so as not to go
up, affixation
Do not run aground on the edge
of the DIMM Cover surroundings
The position where the DIMM Cover and DIMM Heat Sheet
is put is this corner line match.
Put the
DIMM Thermal Sponge
(Space )
9.3.6.7. Assembly of the Heat Spreader and Side Cover R
9.3.6.8. Setting Keyboard
9.3.6.9. Setting DIMM Cover