Filter
Top Products
57
(Attention)
Affixation load of affixation thing not instructed : More than 1kgf/c
1
The cable is passed between bosses
in the wall and the red circle part.
There must not be slack.
Boss application
Wall application
3
SUNCALL is spread on the coloring part.
0 2mm(Tape putting standard)
Do not slacken from the
tangent which connects
the boss externals on
the outside.
Do not slacken from Cab
standing wall by 3mm or
more.
SPEAKER BOX
PET Tape
< Speaker Cable processing >
Safety Work
9.3.4.3. Putting HDD Dumper, Hinge Buckup Sheet and Spacer Washer etc.
0 1mm
TOP_CASE Front core side
(Wall in the part between switche)
SUNCALL spreading.
Execute a figure below yellow range
Execute a figure below yellow range
(To externals point part).
Overflow attention on externals side.
Overflow attention on externals side.
Frontage and edge
side matches
HDD Damper
PCMCIA
Cushion
Side match
Affixes on the side
0.5mm or less of coming to
the surface
Edge side match
Top Case
Hinge Backup Sheet
0 1mm
0 1mm
Put the Washer
Do not close the screw hole
Spacer Washer