Filter
Top Products
49
9.3.3.4. Assembly of the PCMCIA Ejector
9.3.3.5. Assembly of the LAN Cable
(Attention)
Affixation load of affixation thing not instructed : More than 1kgf/c
< Explanation 1 >
The sheet metal bend part of Main Board
is inserted in the corner hole part.
(An opposite direction is also the same)
Refer to < Explanation 1 > for the installation.
< Attention >
Execute after setting the substrate in the receiving treatment
device when working.
The back of substrate
Main Board
Card Bus Ejector
Square hole
Bend
The lever is drawn to
the right before building in.
The lever is drawn to the
left before building in.
Screw
Screw
DXQT2+G6FKL
Do not hang to the machine screw hole.
Edge measures Sheet
Touch the Connector root
Screw fixation of PCMCIA Ejector
Safety work
Affixes from the top and bottom in one tape
The tape must not hang to the ditch.
2 3mm
2 3mm
LAN Cable
PET Tape
Thing to cover part with cable
completely in the rough.
Safety Work