Filter
Top Products
3-23
Making Copies Chapter 3
4. Input Output Mode
Mixed Original Detection Mode
You may sometimes need to make copies from originals of assorted sizes and perhaps you want to use the
Duplexing Document Feeder mounted on your copier. You can by using this function.
In the default settings, the key does not appear on the Touch Panel, indicating that the
Mixed Size function is turned ON. When a black copy, 1 1, and manual background adjustment is
selected, however, the function can now be disabled with the key that appears on
the Touch Panel together with key.
NOTE
The copier cannot staple together the copies of different sizes made in the Mixed Original Detection
mode.
Swing the Document Exit Tray to the left as
shown.
Load the stack of originals so that the rear
edge of each original is pressed against the
rear Document Guide Plate. Then, slide the
front Document Guide Plate against the front
edges of the widest originals.
Touch .
Select or for the “Mixed Size.”
NOTE
This function cannot be set when the copier is set
in the Interrupt, OHP Interleaving, Cover Sheet,
Monotone, or Background Color mode.
Using the Mixed Original Detection Mode
Mixed Size
Mixed Size OFF
ON
Originals Copies
Auto Paper Mode
Auto Size Mode,
Copy Paper: Letter
1134O104EA
1
1151O017AA
2
Input Output
1154P234CA
3
ON OFF
1154P235DA