Filter
Top Products
3-3
Making Copies Chapter 3
2. Placing Originals
Placing Originals on the Glass
Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using a Duplexing Document Feeder, see p. 3-6
(Using plain paper or originals not suitable for the
document feeder)
Raise the Original Cover or Duplexing
Document Feeder and place the original face
down on the Glass.
Align the rear left corner of the original with
the marker on the Width Scale of the
copier glass.
NOTES
• To make an 12”×18” copy from an 11”× 17”
original on a copier equipped with a Duplexing
Document Feeder, align the rear left edge of
the original with the ▼ (photo) mark on the
Length Scale to avoid lost image. ☞ p. 3-4
• To make copies using the Photo mode on a
copier equipped with a Duplexing Document
Feeder, align the rear left edge of the original
with the ▼(photo) mark on the Length Scale.
☞ p. 3-4
Gently lower the Original Cover or
Duplexing Document Feeder.
(Using transparencies and translucent paper for
the original)
Place the original in the same way as the
sheet originals.
Place a blank white sheet of paper of the
same size over the original.
Gently lower the Original Cover or
Duplexing Document Feeder.
Sheet Originals
1
1144O007AA
2
1144y001AA
3
Highly Transparent Originals
1
2
1144O008AA
3