Filter
Top Products
6-19
7. What Does Each Message Mean?
When a Message Appears Chapter 6
Message Cause Action
The orig. is left on the glass,
remove it before proceeding.
You try to use the Duplexing
Document Feeder when there is
an original left on the Original
Glass.
First remove the original from the
Glass, then load the originals in
the Duplexing Document Feeder.
Max. # of sets for sorting is 10. You have entered 11 or more for
the number of copies to be made
in a sort/sort and staple mode.
Reenter 10 or less for the number
of copies to be made.
Max. # for 2-sided copies is 1. You have entered 2 or more for
the number of copies to be made
in a 2-sided copy mode.
Reenter 1 for the number of
copies to be made.
Original size cannot be detected. Original is not placed in the
correct position.
Place the original correctly.
☞ p. 3-3
A non-standard size original is
used.
Cancel the Auto Paper Mode and
select the appropriate copy paper
size. ☞ p. 3-9
Matching size is not available. No Trays contain paper of the
right size to run a copy cycle in
the Auto Paper Mode.
Cancel the Auto Paper Mode and
select the appropriate copy paper
size or make copies using the
Manual Bypass Tray.
Place original on Original Glass. The current control panel settings
defy the use of the Duplexing
Document Feeder.
Remove the originals from the
Duplexing Document Feeder and
place them, one by one, on the
Original Glass. Or, cancel the cur-
rent panel settings.