MiTAC 8050D Laptop User Manual


 
8050
8050
D N/B Maintenance
D N/B Maintenance
32
Supports 4 Wake-On-LAN (WOL) signals (active high, active low, positive pulse, and negative pulse)
Supports auxiliary power-on internal reset, to be ready for remote wake-up when main power still remains
off
Supports auxiliary power auto-detect, and sets the related capability of power management registers in PCI
configuration space.
Includes a programmable, PCI burst size and early Tx/Rx threshold.
Supports a 32-bit general-purpose timer with the external PCI clock as clock source, to generate timer-
interrupt
Contains two large (2Kbyte) independent receive and transmit FIFOs
Advanced power saving mode when LAN function or wakeup function is not used
Uses 93C46 (64*16-bit EEPROM) to store resource configuration, ID parameter, and VPD data.
Supports LED pins for various network activity indications
Supports loop back capability
Half/Full duplex capability
Supports Full Duplex Flow Control (IEEE 802.3x)
MiTac Secret
Confidential Document