Filter
Top Products
8050
8050
D N/B Maintenance
D N/B Maintenance
50
Reassembly
1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU
pins into the holes. Tighten the screw by a flat screwdriver to locking the CPU.
2. Connect the fan’s power cord to the system board, fit the heatsink upon the CPU and secure with three
spring screws.
3. Replace the CPU cover and secure with three screws.
4. Replace the battery pack. (Refer to section 2.2.1 reassembly)
4. To remove the existing CPU, Loosen the screw by a flat screwdriver,upraise the CPU socket to unlock
the CPU. (Figure 2-6)
Figure 2-6 Remove the CPU
MiTac Secret
Confidential Document