Filter
Top Products
8050
8050
D N/B Maintenance
D N/B Maintenance
54
2.2.6 Wireless Card
Figure 2-12 Remove two screws
Figure 2-13 Remove the Wireless card
1. To install the wireless card, match the wireless card 's notched part with the socket's projected part and firmly
insert it into the socket. Then push down until the retaining clips lock the wireless card into position. Then
sure that the antennae fully populated.
2. Tighten the screws to secure the wireless card compartment cover to the housing.
3. Replace the battery pack. (Refer to section 2.2.1 reassembly)
Disassembly
1. Carefully put the notebook upside down. Remove the battery pack. (Refer to sections 2.2.1 Disassembly)
2. Remove the two screws fastening the Mini PCI compartment cover. (Figure 2-12)
3. Disconnect the wireless card’s antennae first (). Then pull the retaining clips outwards () and remove
the wireless card (). (Figure 2-13)
Reassembly
MiTac Secret
Confidential Document