Filter
Top Products
62
80
80
50QMA
50QMA
N/B Maintenance
N/B Maintenance
1. To install the DDR, match the DDR's notched part with the socket's projected part and firmly insert the
SO-DIMM into the socket at 20-degree angle. Then push down until the retaining clips lock the DDR into
position.
2. Replace the CPU cover and secure with seven screws. (Refer to the step 3 of section 2.3.3 Reassembly)
3. Replace the battery pack. (See section 2.3.1 Reassembly)
Disassembly
1. Carefully put the notebook upside down. Remove the battery pack. (See section 2.3.1 Disassembly)
2. Remove the seven screws fastening the CPU cover. (Refer to the step 2 of section 2.3.3 Disassembly)
2.3.6 DDR-SDRAM
3. Pull the retaining clips outwards () and remove the SO-DIMM (). (Figure 2-11)
Reassembly
Figure 2-11 Remove the SO-DIMM
MiTac Secret
Confidential Document