Filter
Top Products
46
Chapter 6: Configuring the Wireless-G VPN Broadband Router
The Administration Tab - Management
Wireless-G VPN Broadband Router
Identification
Contact. Enter the name of the network administrator for the Router, as well as a contact number or e-mail
address.
Device Name. Enter the name of the Router.
Location. Enter the location of the Router. For example, you could include the name of the building, floor number,
and room location, such as Head Office - Floor 5 - Networking 3.
Get Community. Enter the password that allows read-only access to the Router’s SNMP information. The default
name is public.
Set Community. Enter the password that allows read/write access to the Router’s SNMP information.The default
name is private. A name must be entered in this field.
SNMP Trusted Host. You can restrict access to the Router’s SNMP information by IP address. Enter the IP
address in the SNMP Trusted Host field. If this field is left blank, then access is permitted from any IP address.
SNMP Trap-Community. Enter the password required by the remote host computer that will receive trap
messages or notices sent by the Router.
SNMP Trap-Destination. Enter the IP address of the remote host computer that will receive the trap messages.
UPnP
UPnP allows Windows XP and Windows Me to automatically configure the Router for various Internet
applications, such as gaming and videoconferencing.To enable UPnP, check the Enabled box.
Allow Users to Make Configuration Changes. When enabled, this feature allows you to make manual changes
while still using the UPnP feature.
Allow Users to Disable Internet Access. When enabled, this feature allows you to prohibit any and all Internet
connections.
When you have finished making changes on this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For help information, click More.