Filter
Top Products
5 - 2 5 - 2
MELSEC-Q
5 POWER SUPPLY MODULE
Power Supply Module Specifications (Continued)
Performance Specifications
Item
Q64P
Base loading position Power supply module loading slot
Applicable base unit Q3
B, Q6
B
100 to 120VAC/200 to 240VAC
+10%
-15%
Input power supply
(85V to 132VAC/170 to 264VAC)
Input frequency 50/60Hz ±5%
Input voltage distortion factor Within 5% (refer to section 5.1.3)
Max. input apparent power 160VA
Inrush current 20A within 8ms
5VDC 8.5A Rated output
current
24VDC ——
5VDC 9.9A or more Overcurrent
protection*1
24VDC ——
5VDC 5.5 to 6.5V Overvoltage
protection*2
24VDC ——
Efficiency 70% or more
Allowable momentary power failure
period*3
Within 20ms
Dielectric withstand voltage
Across inputs/LG and outputs/FG
2830VAC rms/3 cycles (2000 m (6562 ft.))
Insulation resistance
Across inputs and outputs (LG and FG separated), across inputs and LG/FG, across outputs
and FG/LG 10M
or more by insulation resistance tester
Noise durability
• By noise simulator of 1500Vp-p noise voltage, 1
s noise width and 25 to 60Hz noise
frequency
• Noise voltage IEC61000-4-4, 2kV
Operation indication LED indication (lit at 5VDC output)
Fuse Built-in (Unchangeable by user)
Application
ERR contact (contact switched off (opened: normally closed contact) at an error stop of CPU
module), for CPU module operating status output
Rated switching voltage,
current
24VDC, 0.5A
Minimum switching load 5VDC, 1mA
Response time OFF to ON: 10ms max. ON to OFF: 12ms max.
Life
Mechanical : More than 2 million times
Electrical : More than 100 thousand times at rated switching voltage, current
Surge suppressor No
Contact
output
section
Fuse No
Terminal screw size M3.5 × 7
Applicable wire size 0.75 to 2mm
2
Applicable solderless terminal RAV1.25 to 3.5, RAV2 to 3.5
Applicable tightening torque 66 to 89N•cm
H 98mm (3.86inch)
W 55.2mm (2.33inch)
External
dimensions
D 115mm (4.53inch)
Weight 0.40kg
5