Mitsubishi Electronics Q06HCPU Electronic Accessory User Manual


 
9 - 13 9 - 13
MELSEC-Q
9 LOADING AND INSTALLATION
(b) In case of slim type main base unit
PLC
Door
30 mm
(1.18 inch)
or more
5 mm (0.20 inch) or more
30 mm
(1.18 inch)
or more 1
17 mm (0.67 inch) or more 2
3
20 mm
(0.79 inch)
or more
Panel
Indicates the panel top, wiring
duct or any part position.
1 : For wiring duct with 50 (1.97 inch) mm or less height.
40 mm (1.58 inch) or more for other cases.
2 : The cable of the power supply module of the slim type main base unit protrudes
out of the left end of the module. Install the module while reserving 17 mm (0.67
inch) or more wiring space. If the cable sheath is susceptible to damage caused
by a structural object or part on the left side of the module, take a protective
measure with spiral tube or a similar insulator.
3 : 80 mm (3.15 inch) mm or more for the connector type.