Filter
Top Products
9 - 16 9 - 16
MELSEC-Q
9 LOADING AND INSTALLATION
(b) Removal from Q3
B, Q5 B and Q6 B
Module
connector
Module
Module fixing hole
Base unit
Completion
Hold the module with both
hands, and push the unit fixing
hook on the top of the module
with a finger until it stops.
While pushing the unit fixing
hook, and using the bottom of
the module as a support, pull
the module toward you.
Lift the module upwards and
remove the module fixing
latch from the module
fixing hole.
POINT
When the module fixing screw is used, always remove the module by removing the
module fixing screw and then taking the module fixing latch off the module fixing
hole of the base unit.
Do not try to remove the module forcibly since this may damage the module.