Filter
Top Products
115
CHAPTER 7 COMMUNICATION OF THE ETHERNET ADAPTER MODULE
7
7.3 IP Communications over CC-Link IE Field Network (IP Packet Transfer Function)
7.3.4 Connection to CC-Link IE Field Network
(2) Setting in the Ethernet adapter module
Set the parameters to connect the Ethernet adapter module to CC-Link IE Field Network, using the configuration
tool.
1. Start up the configuration tool using a Web browser. ( Page 179, Section 10.1.2)
2. Open the "Parameter Setting" dialog box in the configuration tool to set the parameters as follows.
Setting item tree NZ2GF-ETB [Parameter] "CC-Link IE Field Network"
• Setting on the request source
• Setting on the request destination
To communicate with an external device having a different network address, the CC-Link IE Field Network gateway setting is
also required. ( Page 124, Section 7.3.7)